OcNOS-RON-6.3.1 : System Management Guide : System Management Command Reference : Digital Diagnostic Monitoring Commands : clear ddm transceiver alarm
clear ddm transceiver alarm
Use this command to clear the transceiver alarm in the DDM monitor at interface level.
Command Syntax
clear ddm transceiver alarm
Default
None
Command Mode
Interface mode
Applicability
This command was introduced before OcNOS version 1.3.
Example
To configure at interface level:
(config)#interface xe1
(config-if)#clear ddm transceiver alarm
 
Last modified date: 07-14-2023