ddm monitor
Use this command to enable DDM monitoring for interfaces which have a supported transceiver.
Use the no form of this command to disable DDM monitoring for all transceivers.
Command Syntax
ddm monitor
no ddm monitor
Parameters
None
Default
By default, DDM monitoring is disabled.
Command Mode
Interface mode
Applicability
This command was introduced before OcNOS version 1.3.
Example
#configure terminal
(config)#interface xe1
(config-if)#ddm monitor
(config-if)#exit
(config)#interface xe1
(config-if)#no ddm monitor
(config-if)#exit
Last modified date: 07-14-2023