OcNOS-RON-6.3.1 : System Management Guide : System Management Command Reference : Digital Diagnostic Monitoring Commands : ddm monitor interval
ddm monitor interval
Use this command to set the monitoring interval for the transceiver.
Use no form with this command to set the monitoring interval to its default.
Command Syntax
ddm monitor interval <60-3600>
no ddm monitor interval
Parameters
<60-3600>
Interval period in seconds.
Default
The default monitoring interval is 60 seconds.
Command Mode
Configuration mode
Applicability
This command was introduced before OcNOS version 1.3.
Example
#configure terminal
(config)#ddm monitor interval 60
 
 
 
Last modified date: 07-14-2023