show ip dhcp snooping
Use this command to display the DHCP configuration, including trusted ports, rate limit, configured VLAN, active VLAN, and strict validation status.
Command Syntax
show ip dhcp snooping bridge <1-32>
Parameters
<1-32>
Bridge number
Command Mode
Exec mode
Applicability
This command was introduced before OcNOS version 1.3.
Example
#sh ip dhcp snooping bridge 1
Bridge Group : 1
DHCP snooping is : Enabled
DHCP snooping option82 is : Disabled
Verification of hwaddr field is : Disabled
Rate limit(pps) : 100
DHCP snooping trust is configured on the following Interfaces
Interface Trusted
--------------- -------
xe1/4 Yes
DHCP snooping IP Source Guard is configured on the following Interfaces
Interface Source Guard
--------------- ------------
Last modified date: 07-14-2023