OcNOS-RON-6.3.1 : System Management Guide : System Management Command Reference : Trigger Failover Commands : tfo
tfo
Use this command to enable or disable trigger failover (TFO). TFO can be enabled only if the bridge mode is STP or RSTP.
Command Syntax
tfo (enable|disable)
Parameters
enable
Enables Trigger failover
disable
Disables Trigger failover
Default
By default, TFO is disabled.
Command Mode
Configure mode
Applicability
This command was introduced before OcNOS version 1.3.
Example
#configure terminal
(config)#tfo enable
 
 
Last modified date: 07-14-2023