accept-lifetime
Use this command to specify the time period during which the authentication on a key chain is received as valid.
Use the no parameter with this command to negate this command.
Command Syntax
accept-lifetime HH:MM:SS MONTH <01-31> <1993-2035> HH:MM:SS MONTH <01-31> <1993-2035>
accept-lifetime HH:MM:SS MONTH <01-31> <1993-2035> infinite
accept-lifetime HH:MM:SS MONTH <01-31> <1993-2035> duration <1-2147483646>
no accept-lifetime
Parameters
HH:MM:SS
Specify the start time of accept-lifetime in hours, minutes and seconds.
<01-31>
Specify the day of the month to start. If the day is a single-digit, the leading 0 must be added, example: 01, 02, 03, etc.
MONTH
Specify the month of the year to start as the first three letters of the month with first letter in upper case, for example, Jan. (case sensitive).
<1993-2035>
Specify the year to start.
HH:MM:SS
Specify the end time of accept-lifetime in hours, minutes and seconds.
<01-31>
Specify the day of the month to end. If the day is a single-digit, the leading 0 must be added, example: 01, 02, 03, etc.
MONTH
Specify the month of the year to end as the first three letters of the month with first letter in caps, for example, Jan. (case sensitive).
<1993-2035>
Specify the year to end.
duration
Indicate the duration parameter.
<1-2147483646>
Specify the actual end time duration of a key in seconds.
infinite
Specify the end time to never expire.
Default
By default, accept-lifetime command is disabled
Command Mode
Keychain-key mode
Applicability
This command was introduced before OcNOS version 1.3.
Examples
The following example shows the setting of accept-lifetime for key1 on the key chain named mychain.
#configure terminal
(config)#key chain mychain
(config-keychain)#key 1
(config-keychain-key)#accept-lifetime 03:03:01 Dec 03 2004 04:04:02 Oct 06 2006
Last modified date: 08/28/2023