bfd session
Use this command to create a BFD IPv4 or IPv6 session on an interface.
Use the no form of the command to delete a BFD session from an interface.
Command Syntax
interface <IFNAME>/bfd session (A.B.C.D | X:X::X:X) (A.B.C.D | X:X::X:X) (multihop) (non-persistent | admin-down | demand-mode)
Parameters
A.B.C.D
Source IPv4 address
X:X::X:X
Source IPv6 address
multihop
Multihop Session
admin-down
Administrative down session
demand-mode
Demand mode session
non-persistent
Non persistent session
Command Mode
Configure mode
Applicability
This command was introduced before OcNOS version 1.3.
Examples
#configure terminal
OcNOS(config)#interface eth2
OcNOS(config-if)#bfd session 20.20.20.2 20.20.20.1 admin-down
OcNOS(config-if)#do sh run bfd
!
interface eth2
bfd session 20.20.20.2 20.20.20.1 admin-down
!
OcNOS(config-if)#no bfd session 20.20.20.2 20.20.20.1 admin-down
OcNOS(config-if)#do sh run bfd
!
interface eth2
bfd session 20.20.20.2 20.20.20.1
!
OcNOS(config-if)#bfd session 20.20.20.2 20.20.20.1 admin-down
OcNOS(config-if)#do sh run bfd
!
interface eth2
bfd session 20.20.20.2 20.20.20.1 admin-down
!
OcNOS(config-if)#no bfd session 20.20.20.2 20.20.20.1
OcNOS(config-if)#do sh run bfd
!
Last modified date: 08/28/2023