key
Use this command to manage, add or delete authentication keys in a key chain. This command allows you to enter the keychain-key mode to set a password for the key.
Command Syntax
key <0-2147483647>
no key <0-2147483647>
Parameters
<0-2147483647>
Specify a key identifier.
Default
By default, BFD uses level-1-2 if there is no Level-2 instance nor a Level-1-2 instance. Otherwise, it uses level-1.
Command Mode
Keychain mode
Applicability
This command was introduced before OcNOS version 1.3.
Examples
The following example configures a key number 1 and shows the change to keychain-key command mode.
#configure terminal
(config)#key chain mychain
(config-keychain)#key 1
(config-keychain-key)#
Last modified date: 08/28/2023