OcNOS-RON : Quality of Service Guide : Quality of Service Command Reference : Quality of Service Commands : match cos inner
match cos inner
Use this command to classify the traffic based on inner cos.
Use the no command to remove the match configuration.
Note: The match commands which accept range have silent exit which makes removal of these match configurations easier. For example, classify the traffic based on inner cos using the command match cos inner 2,4,6 and remove the match configuration using the command no match cos inner 2-6.
Command Syntax
match cos inner WORD
no match cos inner
Parameters
 
WORD
Inner CoS value or list of specified CoS values. Valid values are from 0 to 7.
all
Delete all matched cos entries.
Default
No default value is specified
Command Mode
Class-map mode
Applicability
This command was introduced before OcNOS version 1.3.
Examples
(config)#class-map type qos C_QOS1
(config-cmap-qos)#match cos inner 1
Last modified date: 07/14/2023