set bridge cos
Use this command to set the Class-of-Service (CoS) value for L2 packets only.
Use the no parameter with this command to unset a CoS value.
Command Syntax
set bridge cos (<0-7>)
no set bridge cos
Parameters
<0-7>
CoS value.
Default
No default value is specified
Command Mode
Policy-class-map mode
Applicability
This command was introduced before OcNOS version 1.3.
This command applies only to the Trident II, Trident II+, and Tomahawk platforms.
Examples
#configure terminal
(config)#policy-map pmap1
(config-pmap)#class cmap1
(config-pmap-c)#set bridge cos 2
Last modified date: 07/14/2023