OcNOS-RON : Quality of Service Guide : Quality of Service Command Reference : Quality of Service Commands : set cos
set cos
Use this command for matching traffic classes set action as change cos in the egress packet to the prescribed value.
Use the no command to remove the assigned value from the class.
Command Syntax
set cos <0-7>
no set cos
Parameters
<0-7>
Specify CoS value to assign for this class of traffic
Default
No default value is specified
Command Mode
Policy-map mode
Applicability
This command was introduced before OcNOS version 1.3.
This command applies only to the Trident II, Trident II+, and Tomahawk platforms.
Examples
(config)# policy-map my_policy1
(config-pmap-qos)# class traffic_class2
(config-pmap-c-qos)# no set cos
(config-pmap-c-qos)#
Last modified date: 07/14/2023