set mpls class
Use this command to set mpls class(queue) for the matched packet.
Use the no command to remove the assigned value from the class.
Command Syntax
set mpls class <0-7>
no set mpls class
Parameters
<0-7>
Specify class value to assign for this traffic.
Default
No default value is specified
Command Mode
Policy-map type qos
Applicability
This command was introduced before OcNOS version 1.3.
This command applies only to the Trident II, Trident II+, and Tomahawk platforms.
Examples
(config)# policy-map my_policy1
(config-pmap-qos)# class traffic_class2
(config-pmap-c-qos)# set mpls class 3
(config-pmap-c-qos)#
Last modified date: 07/14/2023