OcNOS-RON : Layer 3 Guide : Intermediate System to Intermediate System Command Reference : IS-IS Commands : adjacency-check
adjacency-check
Use this command to check ISIS neighbor protocol support.
Use the no parameter with this command to uncheck ISIS neighbor protocol support.
Command Syntax
adjacency-check
no adjacency-check
Parameters
None
Default
By default, adjacency-check command is disabled
Command Mode
Router mode
Applicability
This command was introduced before OcNOS version 1.3.
Examples
(config)#router isis bb
(config-router)#adjacency-check
 
(config-router)#no adjacency-check
Last modified date: 08/28/2023