bfd all-interfaces
Use this command to enable the Bidirectional Forwarding Detection (BFD) feature on the interfaces enabled with this ISIS instance.
This command sets BFD fall-over check for all the neighbors under specified process. To disable BFD checking on particular interface use isis bfd disable command at interface mode.
Use the no parameter with this command to disable BFD functionality for an ISIS instance.
Command Syntax
bfd all-interfaces
no bfd all-interfaces
Parameters
None
Default
By default, the BFD feature is disabled.
Command Mode
Router mode
Applicability
This command was introduced before OcNOS version 1.3.
Examples
(config)#router isis aa
(config-router)#bfd all-interfaces
(config-router)#no bfd all-interfaces
Last modified date: 08/28/2023