distance (IPv4)
Use this command in router mode to set the administrative distance for all IPv4 routes or routes from a specific source.
Use the no parameter with this command to remove an administrative distance.
Command Syntax
distance <1-255> (System-ID (WORD|)|)
no distance (System-ID|)
Parameters
<1-255>
Distance range.
System-ID
Source ID in XXXX.XXXX.XXXX format.
WORD
Access-list name.
Default
By default, all options are turned off.
Command Mode
Router mode
Examples
The following example shows setting the administrative distance for all routes.
#configure terminal
(config)#router isis
(config-router)#distance 10
The following example shows setting the administrative distance for a specific route source.
#configure terminal
(config)#router isis
(config-router)#distance 40 0000.0000.0001
Last modified date: 08/28/2023