fast-reroute terminate-hold-on interval
Use this command to set the Loop Free Alternate Fast Reroute (LFA FRR) termination hold-on timer.
Use the no form of this command to set the termination hold-on timer to its default value (1000 milliseconds).
Command Syntax
fast-reroute terminate-hold-on interval <100-100000>
no fast-reroute terminate-hold-on interval
Parameters
<100-100000>
LFA FRR termination hold-on timer interval in milliseconds.
Default
1000 milliseconds
Command Mode
Router mode
Applicability
This command was introduced before OcNOS-OTN version 4.2.
Examples
#configure terminal
(config)#router isis 100
(config-router)#fast-reroute terminate-hold-on interval 7000
(config-router)#no fast-reroute terminate-hold-on interval
Last modified date: 08/28/2023