isis mesh-group
Use this command to set Mesh Group ID on the current interface.
Use the no parameter to unset mesh group on the current interface.
Command Syntax
isis mesh-group <1-4294967295>
no isis mesh-group
Parameters
<1-4294967295>
Specify a mesh group number
Default
By default, mesh groups are not enabled on this interface.
Command Mode
Interface mode
Examples
(config)#interface eth0
(config-if)#isis mesh-group 20
(config)#interface eth2
(config-if)#no isis mesh-group
Last modified date: 08/28/2023