lsp-mtu
Use this command to set maximum transfer unit for link-state packets (LSPs).
Use the no parameter with this command to set the interval to the default.
Command Syntax
lsp-mtu (level-1|level-2|) <512-4352>
no lsp-mtu (level-1|level-2|)
Parameters
<512-4352>
MTU size
level-1
Size for Level-1 IS.
level-2
Size for Level-2 IS.
Default
By default, the MTU is 1492 bytes.
Command Mode
Router mode
Applicability
This command was introduced before OcNOS version 1.3.
Example
#configure terminal
(config)#router isis bb
(config-router)#lsp-mtu 555
Last modified date: 08/28/2023