mpls traffic-eng router-id
Use this command to configure the traffic engineering stable IP address for a system.
Use the no parameter to turn off the feature.
Command Syntax
mpls traffic-eng router-id A.B.C.D
no mpls traffic-eng router-id
Parameters
A.B.C.D
Specify the ISIS router-ID in an IP address format.
Default
If this command is not used, and traffic engineering is enabled, ISIS will use global router-id..
Command Mode
Router mode
Examples
(config)#router isis bb
(config-router)#mpls traffic-eng router-id 10.10.0.23
(config)#router isis bb
(config-router)#no mpls traffic-eng router-id
Last modified date: 08/28/2023