onie-firmware upgrade
Use this command to install the staged firmware packages. This command will reboot the switch in firmware update mode and installs the staged firmware. After the installation switch will boot with OcNOS, Use
show onie-firmware update-results command to view the results of firmware upgrade.
Command Syntax
onie-firmware upgrade
Parameters
None
Default
None
Command Mode
Exec mode
Applicability
This command was introduced in OcNOS-OTN version 4.2.
Examples
#onie-firmware upgrade
Please make sure the device running config is saved, enter 'y' to continue (y/n):y
Device rebooted by ocnos user from cmlsh at time:Tue Apr 2 13:28:43 2019
Last modified date: 07/13/2023