backup
Use this command to configure backup for primary endpoints.
Use no form of this command to unconfigure backup for primary endpoint.
Command Syntax
backup (ep1|ep2) IFNAME
no backup (ep1|ep2)
Parameters
IFNAME
Interface name for backup endpoint
Default
None
Command Mode
Configure-XC mode
Applicability
This command was introduced in OcNOS-OTN version 4.2.
Example
#configure terminal
(config)#cross-connect temp
(config-XC)#backup ep1 xe35
(config-XC)#no backup ep1
Last modified date: 06/28/2023