bridge transmit-holdcount
Use this command to set the maximum number of transmissions of BPDUs by the transmit state machine.
Use the no parameter with this command to restore the default transmit hold-count value.
Command Syntax
bridge <1-32> transmit-holdcount <1-10>
no bridge <1-32> transmit-holdcount
Parameters
<1-32>
Specify the bridge group ID.
<1-10>
Transmit hold-count value.
Default
By default, transmit hold-count is 6
Command Mode
Configure mode
Applicability
This command was introduced before OcNOS version 1.3.
Examples
#configure terminal
(config)#bridge 1 transmit-holdcount 5
(config)#no bridge 1 transmit-holdcount
Last modified date: 07/13/2023