auth-mac system-auth-ctrl
Use this command to enable MAC authentication globally. If MAC authentication is not enabled, other MAC authentication related commands throw an error when issued.
Use the no parameter with this command to disable MAC authentication globally.
Command Syntax
auth-mac system-auth-ctrl
no auth-mac system-auth-ctrl
Parameters
None
Default
Authentication system messages are not displayed.
Command Mode
Configure mode
Applicability
This command was introduced before OcNOS version 1.3.
Examples
#configure terminal
(config)#auth-mac system-auth-ctrl
(config)#no auth-mac system-auth-ctrl
Last modified date: 07/13/2023