dot1x timeout re-authperiod
Use this command to set the interval between reauthorization attempts.
Use the no parameter to disable the interval between reauthorization attempts.
Command Syntax
dot1x timeout re-authperiod <1-4294967295>
no dot1x timeout re-authperiod
Parameter
<1-4294967295>
Specify the seconds between reauthorization attempts.
Default
Default time is 3600 seconds
Command Mode
Interface mode
Applicability
This command was introduced before OcNOS version 1.3.
Example
#configure terminal
(config)#interface eth0
(config-if)#dot1x timeout re-authperiod 25
Last modified date: 07/13/2023