dot1x timeout tx-period
Use this command to set the interval between successive attempts to request an ID.
Use the no parameter to disable the interval between successive attempts to request an ID.
Command Syntax
dot1x timeout tx-period <1-65535>
no dot1x timeout tx-period
Parameter
<1-65535>
Specify the authentication server response timeout.
Default
Default timeout is 30 seconds.
Command Mode
Interface mode
Applicability
This command was introduced before OcNOS version 1.3.
Examples
#configure terminal
(config)#interface eth0
(config-if)#dot1x timeout tx-period 34
(config)#interface eth0
(config-if)#no dot1x timeout tx-period
Last modified date: 07/13/2023