radius-server dot1x retransmit
Use this command to specify the number of times the router transmits each radius request to the server before giving up.
Use the no form of this command to disable retransmission.
Command Syntax
radius-server dot1x retransmit RETRIES
no radius-server dot1x retransmit
Parameter
dot1x
IEEE 802.1X Port-Based Access Control.
RETRIES
Specify the retransmit value. Enter a value in the range 1 to 100. If no retransmit value is specified, the global value is used.
Default
The default value is 3.
Command Mode
Configure mode
Applicability
This command was introduced before OcNOS version 1.3.
Examples
#configure terminal
(config)#radius-server dot1x retransmit 12
(config)#no radius-server dot1x retransmit
Last modified date: 07/13/2023