radius-server dot1x timeout
Use this command to specify the number of seconds a router waits for a reply to a radius request before retransmitting the request.
Use the no parameter to use the default value.
Command Syntax
radius-server dot1x timeout <1-60>
no radius-server dot1x timeout
Parameter
dot1x
IEEE 802.1X Port-Based Access Control.
<1-60>
RADIUS server timeout period in seconds.
Default
The default value is 5 seconds.
Command Mode
Configure mode
Applicability
This command was introduced before OcNOS version 1.3.
Examples
#configure terminal
(config)#radius-server dot1x timeout 20
#configure terminal
(config)#no radius-server dot1x timeout
Last modified date: 07/13/2023