show l2protocol processing interface

OcNOS-RON : Layer 2 Guide : Layer 2 Command Reference : Layer 2 Control Protocols Tunneling Commands : show l2protocol processing interface

This command allows you to display the processing information on Layer 2 protocol interface.

Command Syntax

show l2protocol processing interface IFNAME

Parameters

IFNAME

Interface name

Command Mode

Exec mode and Privileged Exec mode

Applicability

This command is introduced was before OcNOS-SP version 1.0.

Examples

#show l2protocol processing interface xe1/1

Bridge Interface Name Protocol Processing Status

====== ============== ======== =================

1 xe1/1 stp Tunnel

1 xe1/1 gmrp Peer

1 xe1/1 gvrp Peer

1 xe1/1 mmrp Peer

1 xe1/1 mvrp Peer

1 xe1/1 lacp Peer

1 xe1/1 lldp Peer

1 xe1/1 efm Peer

1 xe1/1 elmi Peer

1 xe1/1 ptp Peer

1 xe1/1 synce Peer

Last modified date: 07/13/2023