OcNOS-RON : Layer 2 Guide : Layer 2 Command Reference : Port Security Commands : switchport port-security mac-address
switchport port-security mac-address
Use this command to add static secure MAC addresses.
Use the no parameter to remove static secure MAC addresses.
Command Syntax
switchport port-security mac-address XXXX.XXXX.XXXX
no switchport port-security mac-address XXXX.XXXX.XXXX
switchport port-security mac-address XXXX.XXXX.XXXX vlanId <2-4094>
no switchport port-security mac-address XXXX.XXXX.XXXX vlanId <2-4094>
Parameters
XXXX.XXXX.XXXX
Static secure MAC
<2-4094>
VLAN identifier
Default
NA
Command Mode
Interface mode
Applicability
This command was introduced in OcNOS version 1.3.6.
Examples
#configure terminal
(config)#interface ge1
(config-if)#switchport port-security mac-address 0000.0000.1112 vlan 2
Last modified date: 07/13/2023