switchport mode hybrid ingress-filter
Use this command to set the switching characteristics of the interface as hybrid, and classify both tagged and untagged frames. Received frames are classified based on the VLAN characteristics, then accepted or discarded based on the specified filtering criteria.
Command Syntax
switchport mode hybrid ingress-filter (enable|disable)
Parameters
enable
Set the ingress filtering for received frames. Received frames that cannot be classified in the previous step based on the acceptable frame type parameter (access/trunk) are discarded. This is the default value.
disable
Turn off ingress filtering to accept frames that do not meet the classification criteria.
Default
Received frames that cannot be classified in the previous step based on the acceptable frame type parameter (access/trunk) are discarded.
Command Mode
Interface mode
Applicability
This command was introduced before OcNOS version 1.3.
Examples
#configure terminal
(config)#interface eth0
(config-if)#switchport mode hybrid ingress-filter enable
Last modified date: 07/13/2023