vlan classifier activate
Use this command to activate the VLAN classifier.
Use no form of this command to deactivate the VLAN classifier.
Command Syntax
vlan classifier activate <1-16> vlan <2-4096>
no vlan classifier activate <1-16>
Parameters
<1-16>
Indicates the VLAN classifier activate identifier.
<2-4094>
VLAN identifier of the primary VLAN.
Default
By default, vlan classifier activate value is 1
Command Mode
Interface mode
Applicability
This command was introduced before OcNOS version 1.3.
Example
#configure terminal
(config)#interface eth2
(config-if)#vlan classifier activate 1 vlan 2
(config-if)#no vlan classifier activate 1
Last modified date: 07/13/2023