vlan-reservation
Use this command to create/delete vlan reservation pool on the switch.
Command Syntax
vlan-reservation VLAN_RANGE
no vlan-reservation VLAN_RANGE
Parameters
VLAN_RANGE
VLAN ID 2-4094 or range(s): 2-5,10 or 2-5,7-19
Default
No default value is specified
Command Mode
Configure mode
Applicability
This command was introduced before OcNOS version 5.1.
Example
In the following example, note the change to VLAN configuration mode from Configure mode:
#configure terminal
(config)#vlan database
(config-vlan)#
Last modified date: 07/13/2023