Configuring Port Breakout 40G to 4x10G

OcNOS-RON : Layer 2 Guide : Layer 2 Configuration Guide : Port Breakout Configuration : Configuring Port Breakout 40G to 4x10G

Configuring Port Breakout (40G to 4x10G) is provided in below section.

#configure terminal	Enter configure mode.
(config)#interface xe50/1	Specify the interface (xe5/1) to be configured for port Breakout.
(config-if)# port breakout enable 4X10g	Configure port breakout on interface
(config-if)#exit	Exit interface mode.

Last modified date: 07/13/2023