OcNOS-RON : Multi-Protocol Label Switching Guide : Multi-Protocol Label Switching Configuration Guide : Pseudowire Status : PW Status Commands
PW Status Commands
PW status commands and other related configurations for statically configured MPLS PWs.
mpls l2-circuit NAME VC-ID PEER-IP control-word tunnel-id TUNNEL-ID(manual(pw-status(REFRESH-TIME))
 
Parameter
Description
pw-status
Enables PW status for manual configured PW (Static PW). To disable it, omit this and reconfigure PW.
REFRESH-TIME
Time in seconds after which a PW status is transmitted periodically if an AC fault has occurred. The range is <0-65535>. Default is 600 seconds.
Last modified date: 07/13/2023