nd-ageing-timeout
Use this command to set the neighbor ageing timeout value.
Use no form of this command to set the ageing to its default value.
Command Syntax
nd-ageing-timeout <60-28800>
no nd-ageing-timeout
Parameters
<60-2880>
ND ageing timeout in seconds.
IFNAME
Specify the name of the interface.
XXXX.XXXX.XXXX
Specify the MAC hardware address.
Default value
By default, nd-ageing-timeout is 1500 seconds
Command Mode
Interface mode
Applicability
This command was introduced before OcNOS version 1.3.
Example
#configure terminal
(config)#interface xe1
(config-if)#nd-ageing-timeout 3600
(config-if)#no nd-ageing-timeout
Last modified date: 08/28/2023