IPI-LLDPV2
Configure enable
Enable or disable the LLDP protocol at node level
Attribute Name: enable
Attribute Type: empty
Netconf edit-config payload
<lldp xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-lldpv2">
<global>
<config>
</enable><!-- operation="delete"-->
</config>
</global>
</lldp>
Command Syntax
lldp run
Configure notification interval
This object controls the interval between transmission of LLDP notifications during normal transmission periods
Attribute Name: notification-interval
Attribute Type: uint16
Default Value: 30
Attribute Range: 5-3600
Netconf edit-config payload
<lldp xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-lldpv2">
<global>
<config>
<notification-interval>5</notification-interval> <!-- operation="delete"-->
</config>
</global>
</lldp>
Command Syntax
lldp notification-interval <5-3600>
Configure port description
This attribute specifies to include basic management port description information in LLDP TLV
Attribute Name: port-description
Attribute Type: empty
Netconf edit-config payload
<lldp xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-lldpv2">
<global>
<global-tlv-control>
<global-basic-management>
<config>
</port-description><!-- operation="delete"-->
</config>
</global-basic-management>
</global-tlv-control>
</global>
</lldp>
Command Syntax
lldp tlv-select basic-mgmt port-description
Configure system description
This attribute specifies to include basic management system description information in LLDP TLV
Attribute Name: system-description
Attribute Type: empty
Netconf edit-config payload
<lldp xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-lldpv2">
<global>
<global-tlv-control>
<global-basic-management>
<config>
</system-description><!-- operation="delete"-->
</config>
</global-basic-management>
</global-tlv-control>
</global>
</lldp>
Command Syntax
lldp tlv-select basic-mgmt system-description
Configure system name
This attribute specifies to include basic management system name information in LLDP TLV
Attribute Name: system-name
Attribute Type: empty
Netconf edit-config payload
<lldp xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-lldpv2">
<global>
<global-tlv-control>
<global-basic-management>
<config>
</system-name><!-- operation="delete"-->
</config>
</global-basic-management>
</global-tlv-control>
</global>
</lldp>
Command Syntax
lldp tlv-select basic-mgmt system-name
Configure system capabilities
This attribute specifies to include basic management system capabilities information in LLDP TLV
Attribute Name: system-capabilities
Attribute Type: empty
Netconf edit-config payload
<lldp xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-lldpv2">
<global>
<global-tlv-control>
<global-basic-management>
<config>
</system-capabilities><!-- operation="delete"-->
</config>
</global-basic-management>
</global-tlv-control>
</global>
</lldp>
Command Syntax
lldp tlv-select basic-mgmt system-capabilities
Configure management address
This attribute specifies to include basic management management-address information in LLDP TLV
Attribute Name: management-address
Attribute Type: empty
Netconf edit-config payload
<lldp xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-lldpv2">
<global>
<global-tlv-control>
<global-basic-management>
<config>
</management-address><!-- operation="delete"-->
</config>
</global-basic-management>
</global-tlv-control>
</global>
</lldp>
Command Syntax
lldp tlv-select basic-mgmt management-address
Configure port vlan id
This attribute specifies to include ieee-8021-org-specific port vlan-id information in LLDP TLV
Attribute Name: port-vlan-id
Attribute Type: empty
Netconf edit-config payload
<lldp xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-lldpv2">
<global>
<global-tlv-control>
<global-ieee-8021-org-specific>
<config>
</port-vlan-id><!-- operation="delete"-->
</config>
</global-ieee-8021-org-specific>
</global-tlv-control>
</global>
</lldp>
Command Syntax
lldp tlv-select ieee-8021-org-specific port-vlanid
Configure port protocol vlan id
This attribute specifies to include ieee-8021-org-specific port protocol vlan-id information in LLDP TLV
Attribute Name: port-protocol-vlan-id
Attribute Type: empty
Netconf edit-config payload
<lldp xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-lldpv2">
<global>
<global-tlv-control>
<global-ieee-8021-org-specific>
<config>
</port-protocol-vlan-id><!-- operation="delete"-->
</config>
</global-ieee-8021-org-specific>
</global-tlv-control>
</global>
</lldp>
Command Syntax
lldp tlv-select ieee-8021-org-specific port-ptcl-vlanid
Configure vlan name
This attribute specifies to include ieee-8021-org-specific vlan name information in LLDP TLV
Attribute Name: vlan-name
Attribute Type: empty
Netconf edit-config payload
<lldp xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-lldpv2">
<global>
<global-tlv-control>
<global-ieee-8021-org-specific>
<config>
</vlan-name><!-- operation="delete"-->
</config>
</global-ieee-8021-org-specific>
</global-tlv-control>
</global>
</lldp>
Command Syntax
lldp tlv-select ieee-8021-org-specific vlan-name
Configure protocol identifier
This attribute specifies to include ieee-8021-org-specific protocol identifier information in LLDP TLV
Attribute Name: protocol-identifier
Attribute Type: empty
Netconf edit-config payload
<lldp xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-lldpv2">
<global>
<global-tlv-control>
<global-ieee-8021-org-specific>
<config>
</protocol-identifier><!-- operation="delete"-->
</config>
</global-ieee-8021-org-specific>
</global-tlv-control>
</global>
</lldp>
Command Syntax
lldp tlv-select ieee-8021-org-specific ptcl-identity
Configure vid digest
This attribute specifies to include ieee-8021-org-specific vid usage digest information in LLDP TLV
Attribute Name: vid-digest
Attribute Type: empty
Netconf edit-config payload
<lldp xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-lldpv2">
<global>
<global-tlv-control>
<global-ieee-8021-org-specific>
<config>
</vid-digest><!-- operation="delete"-->
</config>
</global-ieee-8021-org-specific>
</global-tlv-control>
</global>
</lldp>
Command Syntax
lldp tlv-select ieee-8021-org-specific vid-digest
Configure management vlan id
This attribute specifies to include ieee-8021-org-specific management vlan-id information in LLDP TLV
Attribute Name: management-vlan-id
Attribute Type: empty
Netconf edit-config payload
<lldp xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-lldpv2">
<global>
<global-tlv-control>
<global-ieee-8021-org-specific>
<config>
</management-vlan-id><!-- operation="delete"-->
</config>
</global-ieee-8021-org-specific>
</global-tlv-control>
</global>
</lldp>
Command Syntax
lldp tlv-select ieee-8021-org-specific mgmt-vid
Configure link aggregation
This attribute specifies to include ieee-8021-org-specific link aggregation information in LLDP TLV
Attribute Name: link-aggregation
Attribute Type: empty
Netconf edit-config payload
<lldp xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-lldpv2">
<global>
<global-tlv-control>
<global-ieee-8021-org-specific>
<config>
</link-aggregation><!-- operation="delete"-->
</config>
</global-ieee-8021-org-specific>
</global-tlv-control>
</global>
</lldp>
Command Syntax
lldp tlv-select ieee-8021-org-specific link-agg
Configure dcb exchange
This attribute specifies to include ieee-8021-org-specific data center bridging information in LLDP TLV
Attribute Name: dcb-exchange
Attribute Type: empty
Netconf edit-config payload
<lldp xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-lldpv2">
<global>
<global-tlv-control>
<global-ieee-8021-org-specific>
<config>
</dcb-exchange><!-- operation="delete"-->
</config>
</global-ieee-8021-org-specific>
</global-tlv-control>
</global>
</lldp>
Command Syntax
lldp tlv-select ieee-8021-org-specific data-center-bridging
Configure mac phy
This attribute specifies to include ieee-8023-org-specific MAC or PHY information in LLDP TLV
Attribute Name: mac-phy
Attribute Type: empty
Netconf edit-config payload
<lldp xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-lldpv2">
<global>
<global-tlv-control>
<global-ieee-8023-org-specific>
<config>
</mac-phy><!-- operation="delete"-->
</config>
</global-ieee-8023-org-specific>
</global-tlv-control>
</global>
</lldp>
Command Syntax
lldp tlv-select ieee-8023-org-specific mac-phy
Configure max mtu size
This attribute specifies to include ieee-8023-org-specific maximum mtu size information in LLDP TLV
Attribute Name: max-mtu-size
Attribute Type: empty
Netconf edit-config payload
<lldp xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-lldpv2">
<global>
<global-tlv-control>
<global-ieee-8023-org-specific>
<config>
</max-mtu-size><!-- operation="delete"-->
</config>
</global-ieee-8023-org-specific>
</global-tlv-control>
</global>
</lldp>
Command Syntax
lldp tlv-select ieee-8023-org-specific max-mtu-size
Configure locally assigned chassis id
This attribute used to identify the chassis component associated with the local system
Attribute Name: locally-assigned-chassis-id
Attribute Type: string
Default Value: NULL
Netconf edit-config payload
<lldp xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-lldpv2">
<global>
<management-if>
<config>
<locally-assigned-chassis-id>NAME</locally-assigned-chassis-id> <!-- operation="delete"-->
</config>
</management-if>
</global>
</lldp>
Command Syntax
set lldp chassis locally-assigned NAME
Configure options
This attribute returns the terminal debug options which are enabled
Attribute Name: options
Attribute Type: bits (event|rx|tx|message|ha|all)
Netconf edit-config payload
<lldp xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-lldpv2">
<debug>
<config>
<options>event</options> <!-- operation="delete"-->
</config>
</debug>
</lldp>
Command Syntax
debug lldp (event|rx|tx|message|ha|all)
Configure disable lldp agent
Use this attribute to disable LLDP on interface when it is enabled globally
Attribute Name: disable-lldp-agent
Attribute Type: uint8
Netconf edit-config payload
<lldp xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-lldpv2">
<interfaces>
<interface>
<name>WORD</name>
<config>
<name>WORD</name>
</config>
</disable-lldp-agent><!-- operation="delete"-->
</interface>
</interfaces>
</lldp>
Command Syntax
lldp disable default-agent
Configure agent circuit id
DHCP agent circuit ID association on interface
Attribute Name: agent-circuit-id
Attribute Type: string
Default Value: NULL
Netconf edit-config payload
<lldp xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-lldpv2">
<interfaces>
<interface>
<name>WORD</name>
<config>
<name>WORD</name>
</config>
<agent-circuit-id>VALUE</agent-circuit-id> <!-- operation="delete"-->
</interface>
</interfaces>
</lldp>
Command Syntax
set lldp agt-circuit-id VALUE
Configure med device type
LLDP-MED type of interface. Class-0 is not defined, Class-1 is for generic endpoints and is applicable to all endpoints that require the base LLDP discovery services. Class-2 is for media endpoints and it includes endpoints that have IP media capabilities. Class-3 is for communication endpoints i.e., devices acting as end user communication applicances. Calss-4 is for Network Connectivity Device. Class 5-255 are Reserved
Attribute Name: med-device-type
Attribute Type: enum (ep-class1|ep-class2|ep-class3|net-connect)
Netconf edit-config payload
<lldp xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-lldpv2">
<interfaces>
<interface>
<name>WORD</name>
<config>
<name>WORD</name>
</config>
<med-device-type>ep-class1</med-device-type> <!-- operation="delete"-->
</interface>
</interfaces>
</lldp>
Command Syntax
set lldp med-devtype (ep-class1|ep-class2|ep-class3|net-connect)
Configure local name
Interface sub type with local name
Attribute Name: local-name
Attribute Type: string
Netconf edit-config payload
<lldp xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-lldpv2">
<interfaces>
<interface>
<name>WORD</name>
<config>
<name>WORD</name>
</config>
<local-name>NAME</local-name> <!-- operation="delete"-->
</interface>
</interfaces>
</lldp>
Command Syntax
set lldp locally-assigned NAME
Configure agent type
LLDP agent type on this interface
Attribute Name: agent-type
Attribute Type: enum (non-tpmr-bridge|customer-bridge|default)
Netconf edit-config payload
<lldp xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-lldpv2">
<interfaces>
<interface>
<name>WORD</name>
<config>
<name>WORD</name>
</config>
<agent> <!-- operation="delete"-->
<agent-type>default</agent-type>
<config>
<agent-type>default</agent-type>
</config>
</agent>
</agents>
</interface>
</interfaces>
</lldp>
Command Syntax
lldp-agent (non-tpmr-bridge|customer-bridge|)
Configure enable tx rx
Enables interface with LLDP protocol and specifies to send and(or) receive packets on interface
Attribute Name: enable-tx-rx
Attribute Type: enum (rxonly|txonly|txrx)
Default Value: rxonly
Netconf edit-config payload
<lldp xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-lldpv2">
<interfaces>
<interface>
<name>WORD</name>
<config>
<name>WORD</name>
</config>
<agent-type>default</agent-type>
<config>
<agent-type>default</agent-type>
</config>
<enable-tx-rx>rxonly</enable-tx-rx> <!-- operation="delete"-->
</agent>
</agents>
</interface>
</interfaces>
</lldp>
Command Syntax
set lldp enable (rxonly|txonly|txrx)
Configure dcbx enable
Use this attribute to enable/disable DCBX on the given interface
Attribute Name: dcbx-enable
Attribute Type: empty
Netconf edit-config payload
<lldp xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-lldpv2">
<interfaces>
<interface>
<name>WORD</name>
<config>
<name>WORD</name>
</config>
<agent-type>default</agent-type>
<config>
<agent-type>default</agent-type>
</config>
</dcbx-enable><!-- operation="delete"-->
</agent>
</agents>
</interface>
</interfaces>
</lldp>
Command Syntax
dcbx enable
Configure reinit delay
The minimum time interval an LLDP port waits before re-initializing an LLDP transmission
Attribute Name: reinit-delay
Attribute Type: uint32
Default Value: 2
Attribute Range: 1-10
Netconf edit-config payload
<lldp xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-lldpv2">
<interfaces>
<interface>
<name>WORD</name>
<config>
<name>WORD</name>
</config>
<agent-type>default</agent-type>
<config>
<agent-type>default</agent-type>
</config>
<transmit>
<config>
<reinit-delay>1</reinit-delay> <!-- operation="delete"-->
</config>
</transmit>
</agent>
</agents>
</interface>
</interfaces>
</lldp>
Command Syntax
set lldp timer reinit-delay <1-10>
Configure message tx interval
The delay between successive LLDP frame transmissions during normal transmission periods
Attribute Name: message-tx-interval
Attribute Type: uint32
Default Value: 30
Attribute Range: 5-3600
Netconf edit-config payload
<lldp xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-lldpv2">
<interfaces>
<interface>
<name>WORD</name>
<config>
<name>WORD</name>
</config>
<agent-type>default</agent-type>
<config>
<agent-type>default</agent-type>
</config>
<transmit>
<config>
<message-tx-interval>5</message-tx-interval> <!-- operation="delete"-->
</config>
</transmit>
</agent>
</agents>
</interface>
</interfaces>
</lldp>
Command Syntax
set lldp timer msg-tx-interval <5-3600>
Configure message tx hold multiplier
Multiplier of message-tx-interval to determine the Time To Live (TTL) that is carried in LLDP frames transmitted by the LLDP agent
Attribute Name: message-tx-hold-multiplier
Attribute Type: uint32
Default Value: 4
Attribute Range: 1-100
Netconf edit-config payload
<lldp xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-lldpv2">
<interfaces>
<interface>
<name>WORD</name>
<config>
<name>WORD</name>
</config>
<agent-type>default</agent-type>
<config>
<agent-type>default</agent-type>
</config>
<transmit>
<config>
<message-tx-hold-multiplier>1</message-tx-hold-multiplier> <!-- operation="delete"-->
</config>
</transmit>
</agent>
</agents>
</interface>
</interfaces>
</lldp>
Command Syntax
set lldp msg-tx-hold <1-100>
Configure message fast tx
The interval at which LLDP frames are transmitted on behalf of LLDP agent during fast transmission periods
Attribute Name: message-fast-tx
Attribute Type: uint32
Default Value: 1
Attribute Range: 1-3600
Netconf edit-config payload
<lldp xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-lldpv2">
<interfaces>
<interface>
<name>WORD</name>
<config>
<name>WORD</name>
</config>
<agent-type>default</agent-type>
<config>
<agent-type>default</agent-type>
</config>
<transmit>
<config>
<message-fast-tx>1</message-fast-tx> <!-- operation="delete"-->
</config>
</transmit>
</agent>
</agents>
</interface>
</interfaces>
</lldp>
Command Syntax
set lldp timer msg-fast-tx <1-3600>
Configure tx credit max
The maximum number of consecutive LLDPDUs that can be transmitted at any time
Attribute Name: tx-credit-max
Attribute Type: uint32
Default Value: 5
Attribute Range: 1-10
Netconf edit-config payload
<lldp xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-lldpv2">
<interfaces>
<interface>
<name>WORD</name>
<config>
<name>WORD</name>
</config>
<agent-type>default</agent-type>
<config>
<agent-type>default</agent-type>
</config>
<transmit>
<config>
<tx-credit-max>1</tx-credit-max> <!-- operation="delete"-->
</config>
</transmit>
</agent>
</agents>
</interface>
</interfaces>
</lldp>
Command Syntax
set lldp tx-max-credit <1-10>
Configure tx fast init
The number of LLDPDUs to send during the fast transmission periods
Attribute Name: tx-fast-init
Attribute Type: uint32
Default Value: 4
Attribute Range: 1-8
Netconf edit-config payload
<lldp xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-lldpv2">
<interfaces>
<interface>
<name>WORD</name>
<config>
<name>WORD</name>
</config>
<agent-type>default</agent-type>
<config>
<agent-type>default</agent-type>
</config>
<transmit>
<config>
<tx-fast-init>1</tx-fast-init> <!-- operation="delete"-->
</config>
</transmit>
</agent>
</agents>
</interface>
</interfaces>
</lldp>
Command Syntax
set lldp tx-fast-init <1-8>
Configure neighbor timer
This attribute configures timer to discard received message when remote table is full
Attribute Name: neighbor-timer
Attribute Type: uint32
Attribute Range: 1-65535
Attribute Name: neighbor-limit
Attribute Type: uint32
Attribute Range: 1-65535
Netconf edit-config payload
<lldp xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-lldpv2">
<interfaces>
<interface>
<name>WORD</name>
<config>
<name>WORD</name>
</config>
<agent-type>default</agent-type>
<config>
<agent-type>default</agent-type>
</config>
<receive>
<config>
<neighbor-limit>1</neighbor-limit> <!-- operation="delete"-->
<neighbor-timer>1</neighbor-timer> <!-- operation="delete"-->
</config>
</receive>
</agent>
</agents>
</interface>
</interfaces>
</lldp>
Command Syntax
set lldp too-many-neighbors limit <1-65535> discard received-info timer <1-65535>
Configure port timer
This attribute configures timer to discard or delete existing info for received message port MAC when the remote table is full
Attribute Name: port-timer
Attribute Type: uint32
Attribute Range: 1-65535
Attribute Name: neighbor-limit
Attribute Type: uint32
Attribute Range: 1-65535
Attribute Name: port-mac
Attribute Type: string
Netconf edit-config payload
<lldp xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-lldpv2">
<interfaces>
<interface>
<name>WORD</name>
<config>
<name>WORD</name>
</config>
<agent-type>default</agent-type>
<config>
<agent-type>default</agent-type>
</config>
<receive>
<config>
<neighbor-limit>1</neighbor-limit> <!-- operation="delete"-->
<port-mac>MAC</port-mac> <!-- operation="delete"-->
<port-timer>1</port-timer> <!-- operation="delete"-->
</config>
</receive>
</agent>
</agents>
</interface>
</interfaces>
</lldp>
Command Syntax
set lldp too-many-neighbors limit <1-65535> discard existing-info MAC timer <1-65535>
Configure port address
This attribute specifies sub type of the Management Address TLV. Can be configured as mac-addresss or ip-address
Attribute Name: port-address
Attribute Type: enum (mac-address|ip-address)
Default Value: mac-address
Netconf edit-config payload
<lldp xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-lldpv2">
<interfaces>
<interface>
<name>WORD</name>
<config>
<name>WORD</name>
</config>
<agent-type>default</agent-type>
<config>
<agent-type>default</agent-type>
</config>
<config>
<port-address>mac-address</port-address> <!-- operation="delete"-->
</config>
</agent-tlv>
</agent>
</agents>
</interface>
</interfaces>
</lldp>
Command Syntax
set lldp management-address-tlv (mac-address|ip-address)
Configure chassis id
This attribute specifies chassis ID subtype for the LLDP agent on a port. Can be configured as if-alias or ip-address or mac-address or if-name or locally-assgined name
Attribute Name: chassis-id
Attribute Type: enum (if-alias|ip-address|mac-address|if-name|locally-assigned)
Default Value: mac-address
Netconf edit-config payload
<lldp xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-lldpv2">
<interfaces>
<interface>
<name>WORD</name>
<config>
<name>WORD</name>
</config>
<agent-type>default</agent-type>
<config>
<agent-type>default</agent-type>
</config>
<config>
<chassis-id>mac-address</chassis-id> <!-- operation="delete"-->
</config>
</agent-tlv>
</agent>
</agents>
</interface>
</interfaces>
</lldp>
Command Syntax
set lldp chassis-id-tlv (if-alias|ip-address|mac-address|if-name|locally-assigned)
Configure port id
This attribute specifies sub type of the port id TLV. Can be configured as if-alias or mac-address or ip-address or if-name or agent-circuit-id or locally assigned name
Attribute Name: port-id
Attribute Type: enum (if-alias|mac-address|ip-address|if-name|agt-circuit-id|locally-assigned)
Default Value: mac-address
Netconf edit-config payload
<lldp xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-lldpv2">
<interfaces>
<interface>
<name>WORD</name>
<config>
<name>WORD</name>
</config>
<agent-type>default</agent-type>
<config>
<agent-type>default</agent-type>
</config>
<config>
<port-id>mac-address</port-id> <!-- operation="delete"-->
</config>
</agent-tlv>
</agent>
</agents>
</interface>
</interfaces>
</lldp>
Command Syntax
set lldp port-id-tlv (if-alias|mac-address|ip-address|if-name|agt-circuit-id|locally-assigned)
Configure name
This attribute specifies to include basic management port description information in LLDP TLV
Attribute Name: port-description
Attribute Type: enum (not-set|select|unselect)
Default Value: not-set
Netconf edit-config payload
<lldp xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-lldpv2">
<interfaces>
<interface>
<name>WORD</name>
<config>
<name>WORD</name>
</config>
<agent-type>default</agent-type>
<config>
<agent-type>default</agent-type>
</config>
<tlv-control>
<basic-management>
<config>
<port-description>not-set</port-description> <!-- operation="delete"-->
</config>
</basic-management>
</tlv-control>
</agent>
</agents>
</interface>
</interfaces>
</lldp>
Command Syntax
lldp tlv basic-mgmt port-description (select|unselect)
Configure network policy
Network policy information configured on the port for connected media endpoint. Following network policy will be supported VLAN ID, Priority Tagging, VLAN DSCP
Attribute Name: network-policy
Attribute Type: enum (not-set|select|unselect)
Default Value: not-set
Netconf edit-config payload
<lldp xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-lldpv2">
<interfaces>
<interface>
<name>WORD</name>
<config>
<name>WORD</name>
</config>
<agent-type>default</agent-type>
<config>
<agent-type>default</agent-type>
</config>
<tlv-control>
<tlv-media-capabilities>
<config>
<network-policy>not-set</network-policy> <!-- operation="delete"-->
</config>
</tlv-media-capabilities>
</tlv-control>
</agent>
</agents>
</interface>
</interfaces>
</lldp>
Command Syntax
lldp tlv med network-policy (select|unselect)
Configure location
Media Tlv type Location information configured for the port
Attribute Name: location
Attribute Type: enum (not-set|select|unselect)
Default Value: not-set
Netconf edit-config payload
<lldp xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-lldpv2">
<interfaces>
<interface>
<name>WORD</name>
<config>
<name>WORD</name>
</config>
<agent-type>default</agent-type>
<config>
<agent-type>default</agent-type>
</config>
<tlv-control>
<tlv-media-capabilities>
<config>
<location>not-set</location> <!-- operation="delete"-->
</config>
</tlv-media-capabilities>
</tlv-control>
</agent>
</agents>
</interface>
</interfaces>
</lldp>
Command Syntax
lldp tlv med location (select|unselect)
Configure inventory
Includes the TLV for information like hardware revision, software revision etc based on the current hardware platform and the software version
Attribute Name: inventory
Attribute Type: enum (not-set|select|unselect)
Default Value: not-set
Netconf edit-config payload
<lldp xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-lldpv2">
<interfaces>
<interface>
<name>WORD</name>
<config>
<name>WORD</name>
</config>
<agent-type>default</agent-type>
<config>
<agent-type>default</agent-type>
</config>
<tlv-control>
<tlv-media-capabilities>
<config>
<inventory>not-set</inventory> <!-- operation="delete"-->
</config>
</tlv-media-capabilities>
</tlv-control>
</agent>
</agents>
</interface>
</interfaces>
</lldp>
Command Syntax
lldp tlv med inventory (select|unselect)
Configure media capabilities
Includes various media-capabilities of the box for the neighbor
Attribute Name: media-capabilities
Attribute Type: enum (not-set|select|unselect)
Default Value: not-set
Netconf edit-config payload
<lldp xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-lldpv2">
<interfaces>
<interface>
<name>WORD</name>
<config>
<name>WORD</name>
</config>
<agent-type>default</agent-type>
<config>
<agent-type>default</agent-type>
</config>
<tlv-control>
<tlv-media-capabilities>
<config>
<media-capabilities>not-set</media-capabilities> <!-- operation="delete"-->
</config>
</tlv-media-capabilities>
</tlv-control>
</agent>
</agents>
</interface>
</interfaces>
</lldp>
Command Syntax
lldp tlv med media-capabilities (select|unselect)
debug lldp (event|rx|tx|message|ha|all)
Attribute Name: terminal-debug-options
Attribute Type: bits (event|rx|tx|message|ha|all)
Netconf RPC payload
<lldp-terminal-debug-on xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-lldpv2">
<terminal-debug-options>event</terminal-debug-options>
</lldp-terminal-debug-on>
Command Syntax
debug lldp (event|rx|tx|message|ha|all)
no debug lldp (event|rx|tx|message|ha|all)
Attribute Name: terminal-debug-options
Attribute Type: bits (event|rx|tx|message|ha|all)
Netconf RPC payload
<lldp-terminal-debug-off xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-lldpv2">
<terminal-debug-options>event</terminal-debug-options>
</lldp-terminal-debug-off>
Command Syntax
no debug lldp (event|rx|tx|message|ha|all)
clear lldp counters ((IFNAME|)|)
Attribute Name: interface-name
Attribute Type: string
Netconf RPC payload
<clear-lldp-counter xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-lldpv2">
<interface-name>IFNAME</interface-name>
</clear-lldp-counter>
Command Syntax
clear lldp counters ((IFNAME|)|)
snmp restart lldp
Netconf RPC payload
<lldp-snmp-restart xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-lldpv2"/>
Command Syntax
snmp restart lldp