IPI-IGP-TE
Configure delay
Use this attribute to specify a unidirectional, link delay value for the interface
Attribute Name: delay
Attribute Type: uint32
Attribute Range: 1-16777215
Netconf edit-config payload
<igp-te xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-igp-te">
<interfaces>
<interface>
<name>WORD</name>
<config>
<name>WORD</name>
</config>
<uni-link>
<config>
<delay>1</delay> <!-- operation="delete"-->
</config>
</uni-link>
</interface>
</interfaces>
</igp-te>
Command Syntax
delay-measurement static uni-link-delay <1-16777215>
Configure delay variation
Use this attribute to specify a unidirectional, link delay variation value for the interface
Attribute Name: delay-variation
Attribute Type: uint32
Attribute Range: 0-16777215
Netconf edit-config payload
<igp-te xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-igp-te">
<interfaces>
<interface>
<name>WORD</name>
<config>
<name>WORD</name>
</config>
<uni-link>
<config>
<delay-variation>0</delay-variation> <!-- operation="delete"-->
</config>
</uni-link>
</interface>
</interfaces>
</igp-te>
Command Syntax
delay-measurement static uni-delay-variation <0-16777215>
Configure loss percentage
Use this attribute to specify a unidirectional, link loss value for the interface
Attribute Name: loss-percentage
Attribute Type: decimal64
Netconf edit-config payload
<igp-te xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-igp-te">
<interfaces>
<interface>
<name>WORD</name>
<config>
<name>WORD</name>
</config>
<uni-link>
<config>
<loss-percentage>VALUE</loss-percentage> <!-- operation="delete"-->
</config>
</uni-link>
</interface>
</interfaces>
</igp-te>
Command Syntax
loss-measurement static uni-link-loss VALUE
Configure a bit max
use this attribute to configure a-bit-max
Attribute Name: a-bit-max
Attribute Type: uint32
Attribute Range: 1-16777215
Netconf edit-config payload
<igp-te xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-igp-te">
<interfaces>
<interface>
<name>WORD</name>
<config>
<name>WORD</name>
</config>
<uni-link>
<delay-threshold>
<a-bit> <!-- operation="delete"-->
<config>
</config>
</a-bit>
</delay-threshold>
</uni-link>
</interface>
</interfaces>
</igp-te>
Command Syntax
delay-measurement a-bit-delay-threshold min <1-16777215> max <1-16777215>
Configure max value
use this attribute to configure max-value
Attribute Name: max-value
Attribute Type: uint32
Attribute Range: 1-16777215
Netconf edit-config payload
<igp-te xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-igp-te">
<interfaces>
<interface>
<name>WORD</name>
<config>
<name>WORD</name>
</config>
<uni-link>
<min-max-delay>
<delay> <!-- operation="delete"-->
<max-value>1</max-value>
<config>
<max-value>1</max-value>
<min-value>1</min-value>
</config>
<min-value>1</min-value>
</delay>
</min-max-delay>
</uni-link>
</interface>
</interfaces>
</igp-te>
Command Syntax
delay-measurement static min-max-uni-link-delay <1-16777215> <1-16777215>
Configure loss a bit max
use this attribute to configure loss-a-bit-max
Attribute Name: loss-a-bit-max
Attribute Type: decimal64
Netconf edit-config payload
<igp-te xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-igp-te">
<interfaces>
<interface>
<name>WORD</name>
<config>
<name>WORD</name>
</config>
<uni-link>
<loss>
<threshold> <!-- operation="delete"-->
<loss-a-bit-max>VALUE</loss-a-bit-max>
<config>
<loss-a-bit-max>VALUE</loss-a-bit-max>
<loss-a-bit-min>VALUE</loss-a-bit-min>
</config>
<loss-a-bit-min>VALUE</loss-a-bit-min>
</threshold>
</loss>
</uni-link>
</interface>
</interfaces>
</igp-te>
Command Syntax
loss-measurement a-bit-loss-threshold min VALUE max VALUE
Configure a bit max range maximum
use this attribute to configure a-bit-max-range-maximum
Attribute Name: a-bit-max-range-maximum
Attribute Type: uint32
Attribute Range: 1-16777215
Netconf edit-config payload
<igp-te xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-igp-te">
<interfaces>
<interface>
<name>WORD</name>
<config>
<name>WORD</name>
</config>
<uni-link>
<min-max-delay-threshold>
<a-bit> <!-- operation="delete"-->
<a-bit-max-range-maximum>1</a-bit-max-range-maximum>
<config>
<a-bit-max-range-maximum>1</a-bit-max-range-maximum>
<a-bit-max-range-minimum>1</a-bit-max-range-minimum>
<a-bit-min-range-maximum>1</a-bit-min-range-maximum>
<a-bit-min-range-minimum>1</a-bit-min-range-minimum>
</config>
<a-bit-max-range-minimum>1</a-bit-max-range-minimum>
<a-bit-min-range-maximum>1</a-bit-min-range-maximum>
<a-bit-min-range-minimum>1</a-bit-min-range-minimum>
</a-bit>
</min-max-delay-threshold>
</uni-link>
</interface>
</interfaces>
</igp-te>
Command Syntax
delay-measurement a-bit-min-max-delay-threshold min <1-16777215> <1-16777215> max <1-16777215> <1-16777215>