bfd all-interfaces
Use this command to enable Bidirectional Forwarding Detection (BFD) on all interfaces.
Use the no form of this command to disable BFD.
Command Syntax
bfd all-interfaces
no bfd all-interfaces
Parameters
None
Default
No default value is specified
Command Mode
Router mode
Applicability
This command was introduced before OcNOS version 1.3.
Examples
#configure terminal
(config)#router ospf 100
(config-router)#bfd all-interfaces
(config)#router ospf 100
(config-router)#no bfd all-interfaces
Last modified date: 08/28/2023