OcNOS-RON : Layer 3 Guide : Open Shortest Path First Command Reference : OSPFv2 Commands : fast-reroute keep-all-paths
fast-reroute keep-all-paths
Use this command to enable fast rerouting on all OSPF interfaces.
Use the no parameter with this command to disable fast rerouting.
Command Syntax
fast-reroute keep-all-paths
no fast-reroute keep-all-paths
Parameters
None
Defaults
By default, fast rerouting is disabled
Command Mode
Router mode
Applicability
This command was introduced before OcNOS version 1.3.
Examples
#configure terminal
(config)#router ospf 200
(config-router)#fast-reroute keep-all-paths
Last modified date: 08/28/2023