ip ospf fast-reroute per-prefix candidate disable
Use this command to prohibit the interface from being used as the next hop in a repair path.
Use the no option with this command to use the interface as the next hop in a repair path.
Command Syntax
ip ospf fast-reroute per-prefix candidate disable
no ip ospf fast-reroute per-prefix candidate disable
Parameters
None
Default
No default value is specified
Command Mode
Interface mode
Applicability
This command was introduced before OcNOS version 1.3.
Example
#configure terminal
(config)#interface eth0
(config-if)#ip ospf fast-reroute per-prefix candidate disable
Last modified date: 08/28/2023