OcNOS-RON : Layer 3 Guide : Open Shortest Path First Command Reference : OSPFv3 Commands : bfd all-interfaces
bfd all-interfaces
Use this command to enable Bidirectional Forwarding Detection (BFD) on all interfaces.
Use the no form of this command to disable BFD.
Command Syntax
bfd all-interfaces
no bfd all-interfaces
Parameters
None
Default
By default, BFD is disabled on all OSPF enabled interfaces.
Command Mode
Router mode
Applicability
This command was introduced before OcNOS version 1.3.
Examples
This example changes the reference bandwidth to 1Gbps to change the Fast Ethernet interface cost from 1 to 10.
#configure terminal
(config)#router ipv6 ospf 1
(config-router)#bfd all-interfaces
 
 
Last modified date: 08/28/2023