ip pim bfd
Use this command to enable PIMv4 BFD on an interface.
Use the no option with this command to revert to default.
Command Syntax
ip pim bfd (disable|)
no ip pim bfd (disable|)
Parameters
disable
Useful when PIMv4 BFD is enabled at global level (refer command ip pim bfd all-interfaces) and it is required to disable pim bfd on a particular interface.
Default
By default, PIMv4 BFD is disabled on the interface.
Command Mode
Applicability
This command was introduced in OcNOS-OTN version 5.1.
Examples
#configure terminal
(config)#ip pim bfd
#configure terminal
(config)#ip pim bfd disable
Last modified date: 07/14/2023