ip pim ignore-rp-set-priority
Use this command to ignore the RP-SET priority value, and use only the hashing mechanism for RP selection. This command is used to inter-operate with older Cisco IOS versions.
Use the no option with this command to remove this setting.
Command Syntax
ip pim ignore-rp-set-priority
ip pim (vrf NAME|) ignore-rp-set-priority
no ip pim ignore-rp-set-priority
no ip pim (vrf NAME|) ignore-rp-set-priority
Parameters
vrf
The VPN routing/forwarding instance
NAME
Specify the name of the VPN routing/forwarding instance
Default
By default, all ip pim options are disabled.
Command Mode
Configure mode
Applicability
This command was introduced before OcNOS version 1.3.
Examples
#configure terminal
(config)#ip pim ignore-rp-set-priority
#configure terminal
(config)#no ip pim ignore-rp-set-priority
Last modified date: 07/14/2023