debug ipv6 pim packet
Use this command to activate debugging of incoming or outgoing PIM packets.
Use the no option with this command to deactivate debugging of incoming or outgoing PIM packets.
Command Syntax
debug ipv6 pim packet
debug ipv6 pim packet in
debug ipv6 pim packet out
debug ipv6 pim (vrf NAME|) packet
debug ipv6 pim (vrf NAME|) packet in
debug ipv6 pim (vrf NAME|) packet out
no debug ipv6 pim packet
no debug ipv6 pim packet in
no debug ipv6 pim packet out
no debug ipv6 pim (vrf NAME|) packet
no debug ipv6 pim (vrf NAME|) packet in
no debug ipv6 pim (vrf NAME|) packet out
Parameters
vrf
The VPN routing/forwarding instance
NAME
Specify the name of the VPN routing/forwarding instance
in
Debug incoming packets
out
Debug outgoing packets
Command Mode
Configure and Privileged Exec modes
Applicability
This command was introduced before OcNOS version 1.3.
Example
#configure terminal
(config)#debug ipv6 pim packet in
Last modified date: 07/14/2023