OcNOS-RON : Layer 3 Guide : Routing Information Protocol Command Reference : Routing Information Protocol VPN Commands : show ip vrf
show ip vrf
Use this command to display VRF information. This command is supported in RIP (IPv4).
Command Syntax
show ip vrf
show ip vrf WORD
Parameters
WORD
Specify the name for the VRF instance.
Default
None
Command Mode
Exec mode and Privileged Exec mode
Applicability
This command was introduced before OcNOS version 1.3.
Example
#show ip vrf myVRF
 
VRF myVRF, FIB ID 1
Router ID: 1.1.1.2 (config)
Interfaces:
eth1
eth3
VRF myVRF; (id=1); RIP enabled Interfaces:
eth1
 
Last modified date: 08/28/2023