OcNOS-RON : Layer 3 Guide : Routing Information Protocol Command Reference : Routing Information Protocol Commands : ip rip send-packet
ip rip send-packet
Use this command to enable sending RIP packets through the current interface.
Use the no parameter with this command to disable this feature.
Command Syntax
ip rip send-packet
no ip rip send-packet
Parameters
None
Default
Send packet is enabled.
Command Mode
Interface mode
Applicability
This command was introduced before OcNOS version 1.3.
Example
This example shows packet sending being turned on for interface eth0.
#configure terminal
(config)#interface eth0
(config-if)#ip rip send-packet
Last modified date: 08/28/2023