debug ipv6 rip
Use this command to specify the options for the displayed debugging information for RIPng events, RIPng packets and RIPng NSM communications.
Use the no option with this command to turn off debugging options for RIPng. The undebug alias command can also be used.
Command Syntax
debug ipv6 rip (all|events|packet send|packet recv|packet|packet detail|nsm|rib|)
no debug ipv6 rip (all|events|packet send|packet recv|packet|packet detail|nsm|rib|)
undebug ipv6 rip (all|)
undebug ipv6 rip events
undebug ipv6 rip nsm
undebug ipv6 rip packet (recv|send|) (detail|)
undebug ipv6 rip rib
Parameters
all
Debug all RIP information.
events
Debug RIP events.
nsm
Debug RIP and NSM communications.
rib
Debug RIP and RIB communications.
packet
Debug RIP packets, only Routing Information Protocol
recv
Debug received packets.
send
Debug sent packets.
detail
Display detailed information for the sent or received packet.
Default
Disabled
Command Mode
Privileged Exec mode and Configure mode
Applicability
This command was introduced before OcNOS version 1.3.
Examples
The following example specifies the options for the displayed debugging information in Configure mode prompt.
#configure terminal
(config)#debug ipv6 rip events
(config)#debug ipv6 rip packet send detail
(config)#debug ipv6 rip nsm
The following example shows to disable all debugging in Privileged Exec mode prompt.
#undebug ipv6 rip events
#undebug ipv6 rip packet send detail
#undebug ipv6 rip nsm
Last modified date: 08/28/2023