distance
Use this command to set the administrative distance for RIP.
Use the no option with this command to disable this function.
For more details about this command, see the IPv4 version of this command (
distance).
Command Syntax
distance <1-255>
no distance
Parameter
<1-255>
Specify the administrative distance value.
Default
By default, the administrative distance is 120.
Command Mode
Router mode
Applicability
This command was introduced before OcNOS version 1.3.
Example
#configure terminal
(config)#router ipv6 rip
(config-router)#distance 100
Last modified date: 08/28/2023