OcNOS-RON : Layer 3 Guide : Routing Information Protocol Command Reference : RIPng Commands : ipv6 router rip
ipv6 router rip
Use this command to enable RIPng routing on the interface.
Use the no parameter with this command to disable RIPng routing.
Command Syntax
ipv6 router rip
no ipv6 router rip
Parameters
None
Default
None
Command Mode
Interface mode
Applicability
This command was introduced before OcNOS version 1.3.
Example
#configure terminal
(config)#interface eth0
(config-if)#ipv6 router rip
Last modified date: 08/28/2023