route
Use this command to debug the specified route advertisement. Use this command to configure static RIPng routes.
Use the no parameter with this command to disable this function.
Command Syntax
route X:X::X:X/M
no route X:X::X:X/M
Parameter
X:X::X:X/M
Specify the IPv6 address prefix and length.
Command Mode
Router mode
Applicability
This command was introduced before OcNOS version 1.3.
Examples
#configure terminal
(config)#router ipv6 rip
(config-router)#route 3ffe:1234:5678::1/64
Last modified date: 08/28/2023